8608768, ZeroStart Power Cord - Parallel Y Cord 120V 15A, 7'x1' (2m x 305mm)

• 8608768
• Power Cord - Parallel Y Cord 120V 15A, 7'x1' (2m x 305mm)
• Weatherproof Parallel Y-Cord with AC Outlet
• 15 Amps
• Volts: 120
• 2000 Watts
• Gauges: 14
• Length: 7' (2.2m)
• Wire: 14/3 SJOW
• 12" Female Plug
• Type: Immersion
• Diameter: 1" NPT
• Silicone Connector: K
• Plug Type: A (WP) - NEMA - 5-15
• Made in the USA
• 1 Year Warranty against defects in material and workmanship under normal use and service conditions, starting on the date of purchase

This power cord features a 120 Volt 15 Amp plug that fits all Zerostart weatherproof receptacles. One cord is 12″ long with a standard 120 Volt 15 Amp female plug, the second cord is 7′ long with a 90° Silicone heater terminal, connected in electrical parallel used to operate two heaters of the same voltage.
Example: 1 Block heater and 1 battery warmer.

Engineered to provide quality heating solutions, the highly regarded Zerostart® brand products keep automotive, light to medium trucks, off-road and power generation equipment performing at top levels in challenging weather conditions.  We continually strive to meet our customers needs through the combined development of products and production systems for OEM and Aftermarket clients.

What's the difference between an immersion heater and a freeze plug heater?
There is no difference. Both describe a heater that is used to warm the engine coolant in the block. A freeze plug uses the V-Loc system to lock the heater into position in the block by tightening the clamps against the wall of the engine.  An immersion heater threads into the engine block.

How long can I plug in the block heater?
To pre warm your vehicle, the block heater should be plugged in at least 3-4 hours. There is nothing detrimental about leaving it plugged in overnight or longer.