40202R, Truck-Lite 40 Series Stop/Turn/Tail Light Only

• 40202R
• Truck Lite 40 Series 4" Stop/Turn/Tail & Front/Park/Turn Sealed Light ONLY
• Flush mount grommets are designed for mounting in a 4-1/2" hole
• Heavy duty bulb last longer
• Uniquely designed shock-mount extends lamp life
• Voltage: 12
• Warranty: 2 years
• Lighting Technology: Incandescent
• Number of Diodes/Bulbs: 1 
• Series: 40
• Lamp Connection: PL-3
• Plug Side One: No Plug
• Plug Side Two: No Plug
• Lens Shape: Round
• Lens Color: Red
• Lens Material: Poly carbonate
• Compliance Family: FMVSS 108 / CMVSS 108 / DOT / SAE
• Mount Type: Grommet Mount
• Mounting Connector Diameter: 4.5 inches
• Lens Width & Height: 4.31 x 4.31 inches

Cover for part# 40002R

VMRS: 053010001

Cross#'s: TL40202R, 01-ST-40202R, FLTSE4000R, 52772, 52773, TL 40202R, 81121, 402023, 40215R, 40215R3, 40242R, 40248R3, 40403, 4044,

40443, 427, 52672, 526723, 527723, 529223, 52952, 529523, 7090, 841340215R, FL4044, FL40443, GR52672, GR526723, GR527723, GR527725, GR52952, GR529523, GT526723, GT527725, L40215R, M427R, P3M427R, PM427, S4040, S40443, SI4040, SI40443, SS4040, SS4044, SS40443, SS7090, SX40403, SX4044, SX40443, TL40215R, TL40215R3,  TL40242R, TL40242R3, TL40248R3, TL841340215R, 40202RP, 2122618, 40202R4, 25172900, 52922, 52772-3

VMRS: 034-002-013

What lights do I need?

Check the specific vehicle requirements or contact Truck-Lite Technical Support. Note that states cannot require anything different than what is in FMVSS-108; however, states can add regulations. Contact Truck-Lite for special situations.

How hard should I tighten down (torque) plastic lights or devices?

Over-torqueing will generally cause cracking or distortion. Use the torque specifications provided by the manufacturer. A marker light will generally be in the neighborhood of 8 to 20 inch lbs., but a good rule of thumb is to use the minimum torque necessary to secure the device.

What's the difference between an acrylic and polycarbonate lens?

Given its weather resistance and clarity, acrylic has long been the most widely used material for lenses. However, polycarbonate is much less likely to shatter, chip or crack upon impact and can withstand higher exposure to heat. Polycarbonate lenses are given a special coating to improve abrasion, UV and chemical resistance; still, to prolong the life of your lenses, it is recommended that you only clean them with a mild detergent and soft cotton cloth.

The following solvents/cleaners MUST NOT be used with polycarbonate:

•  Trichlor
•  Acetone
•  Triclene®
•  Methyl Ethyl Keytone (MEK)
•  MIBK
•  Toluol
•  Benzol
•  Gasoline
•  Carbon Tetrachloride
•  Chlorinated Hydrocarbons
•  Texize-8006, 8129, 8758
•  Liquid Cleaner - 8211
•  Agitene®
•  Ajax®
•  All Liquid Detergents
•  Pink Lux® (phosphate free)
•  Diversol®
•  Lemon Joy® (phosphate free)
•  Kleenol Plastics
•  Lestoil®
•  Lysol®
•  Stanisol Naphtha®
•  Oils