40004, Truck-Lite 4" Back Up Light Kit with Grommet - 40 Series

• 40004
• 4" Back Up Light Kit with Grommet
• 40 Series
• Compliance Family: FMVSS 108|CMVSS 108|DOT|SAE
• Polycarbonate lens and housing are sonically sealed
• Bulb is shock mounted for extended life
• Legal only for back-up function
• Not recommended for dome lamp use
• Replaced Signal-Stat 4041W and 4047W
• Diamond Shell: No
• Housing & Lens Material: Polycarbonate (Plastic)
• Kit: Yes
• Lens Shape: Round
• Incandescent Lighting
• Current Amp: 2.1
• Lamp Connection: PL-3
• Lens Color: Clear
• Mount/Trim Color: Black
• Mount/Trim Material: PVC
• Mount Type: Grommet Kit
• Number of Diodes/Bulbs: 1
• Number of Wires: 2
• Wire Gauge: 16
• Plug Side One: PL-2
• Plug Side Two: Stripped End|Ring Terminal
• Reflectorized: No
• Sealed/Bulb Replaceable: Sealed
• Standards Met: R
• Voltage: 12
• Depth: 2.11
• Height: 5.38
• Length: 2.1
• Weight: 0.55
• Width: 4.31
• Temp. Description: Mdl 40 B/U Lamp Kit
• Made in the USA
• 2 Year Warranty

Works with the below Part#:

• Back Up Light Only: 40204

Truck Lite Back Up & License Plate Lights

Cross#'s: 09014859, TRU-40004, 01203686, 2119427, 40004-4, 25172900, 4041W, 4047W

VMRS:  034-003-074

What lights do I need?

Check the specific vehicle requirements or contact Truck-Lite Technical Support. Note that states cannot require anything different than what is in FMVSS-108; however, states can add regulations. Contact Truck-Lite for special situations.

How hard should I tighten down (torque) plastic lights or devices?

Over-torqueing will generally cause cracking or distortion. Use the torque specifications provided by the manufacturer. A marker light will generally be in the neighborhood of 8 to 20 inch lbs., but a good rule of thumb is to use the minimum torque necessary to secure the device.

I'm painting my vehicle, what if I get some paint on the lens?

You should be careful to avoid getting paint on the lights; most paints (excluding water based) are incompatible with polycarbonate lights. They may also cause wires or cable insulation to crack.

What's the difference between an acrylic and polycarbonate lens?

Given its weather resistance and clarity, acrylic has long been the most widely used material for lenses. However, polycarbonate is much less likely to shatter, chip or crack upon impact and can withstand higher exposure to heat. Polycarbonate lenses are given a special coating to improve abrasion, UV and chemical resistance; still, to prolong the life of your lenses, it is recommended that you only clean them with a mild detergent and soft cotton cloth.

The following solvents/cleaners MUST NOT be used with polycarbonate:

•  Trichlor
•  Acetone
•  Triclene®
•  Methyl Ethyl Keytone (MEK)
•  MIBK
•  Toluol
•  Benzol
•  Gasoline
•  Carbon Tetrachloride
•  Chlorinated Hydrocarbons
•  Texize-8006, 8129, 8758
•  Liquid Cleaner - 8211
•  Agitene®
•  Ajax®
•  All Liquid Detergents
•  Pink Lux® (phosphate free)
•  Diversol®
•  Lemon Joy® (phosphate free)
•  Kleenol Plastics
•  Lestoil®
•  Lysol®
•  Stanisol Naphtha®
•  Oils