2765219, ORS Loctite Tak Pak Accelerator

(No reviews yet) Write a Review
SKU:
2765219
Shipping:
Calculated at Checkout
MSRP: $18.13
$17.53
— You save $0.60

Description

  • New Part # 2765219
  • Previous Part # 18580
  • 1.75 oz. Loctite Tak Pak 7452 Accelerator with Spray Applicator
  • Mil-A-46050C Type IIA
  • For use with instant adhesives
  • Cures excess adhesive
  • Provides excellent cosmetic appearance avoiding the white discoloration of instant adhesives
  • Not recommended on plastics prone to stress cracking
  • Highly flammable liquid and vapor
  • Causes serious eye irritation
  • May cause drowsiness or dizziness
  • Store below 80 Degrees Fahrenheit
  • 10 Per Box

Loctite Super Bonder Instant Adhesive (Cyanoacrylate) Part#: 41450

Seat Repair Accessories

LOCTITE® SF 7452 is transparent, light amber, cure-speed accelerator for the increased cure speed of LOCTITE cyanoacrylate adhesives. It can be either pre- or post-applied. It is especially suited for post-application on cyanoacrylate adhesive to ensure rapid fixturing. Typical applications include securing wires or coils to PCBs, tamper-proofing adjustable components, mounting stand-offs, edge guides and board stiffeners. 

Directions for use

Post Activation
1. Apply Loctite Super Bonder Instant Adhesive cyanoacrylate (Part # 41450) to the parts to be bonded or
fixed.
2. Apply Activator over all exposed cyanoacrylate adhesive
by spray or drop. (Typically use one drop of activator per
drop of exposed adhesive).

Surface Activation
1. Apply one coating of Activator to the area to be bonded by
spray, brush or dipping. Contaminated surfaces may need
special cleaning or degreasing prior to activation to
remove any soluble contamination.
2. Allow LOCTITE®
7452™ to fully evaporate from parts
prior to bonding to avoid solvent entrapment within the
bond joint.
3. Apply the Loctite cyanoacrylate (Part # 41450) product immediately after
drying or not more than 45- seconds thereafter.
4. Activator can be re-applied if necessary if there is a delay
of more than 45- seconds between original activator and
adhesive application. 

Safety Data Sheet

View AllClose

Related Products