18300R, Truck-Lite Model 18 Red Clearance/Marker Light Kit (Light, Plug, and Mounting Gasket)

• 18300R
• Truck-Lite Model 18 Red Clearance/Marker Light Kit (Light, Plug, and Mounting Gasket)
• Sonically Welded Lens and Housing
• Not Suitable for PC Requirements
• Replaced Signal-Stat 1572/1572A
• Voltage: 12
• Incandescent Lighting
• Number of Diodes/Bulbs: 1 
• Number of Wires: 2
• Lamp Connection: Socket Assembly
• Plug Side One: Socket Assembly
• Plug Side Two: Ring Terminal / Stripped End
• Lens Shape: Rectangular
• Lens Color: Red
• Housing Material: ABS
• Mount/Trim Color: Red
• Lens Material: Acrylic
• Compliance Family: FMVSS 108 / CMVSS 108 / DOT / SAE
• Mount Type: 2 Screw
• Mounting Connector Diameter: 0.2 inches
• Lens Width & Height: 4.5 x 1.63 inches
• Wire Gauge: 18
• Made in the USA
• 1 Year Warranty

Truck-Lite Model 18 Clearance/Marker Light (Yellow):  18300Y

Wagner Miniature Bulb (10/Pack):  194

Truck Lite Marker & Clearance Lights

Replacement Parts:

• Lens: 99012R
• Mounting Gasket: 97927
• Plug: 94940

Related Items - Blue Bird Part #'s: 

• Bulb: 10027740
• Gasket: 97927
• Plug: 94940

Cross#'s: 01-CT-18300RL, 01-CT-18300R, TL 18300R, 07-18300R, 1941376, TRU-18300R, LK3564, 2061448, 18300R4, 25172900

VMRS:  034-004-024

What lights do I need?

Check the specific vehicle requirements or contact Truck-Lite Technical Support. Note that states cannot require anything different than what is in FMVSS-108; however, states can add regulations. 

How hard should I tighten down (torque) plastic lights or devices?

Over-torqueing will generally cause cracking or distortion. Use the torque specifications provided by the manufacturer. A marker light will generally be in the neighborhood of 8 to 20 inch lbs., but a good rule of thumb is to use the minimum torque necessary to secure the device.

I'm painting my vehicle, what if I get some paint on the lens?

You should be careful to avoid getting paint on the lights; most paints (excluding water based) are incompatible with polycarbonate lights. They may also cause wires or cable insulation to crack.

What's the difference between an acrylic and polycarbonate lens?

Given its weather resistance and clarity, acrylic has long been the most widely used material for lenses. However, polycarbonate is much less likely to shatter, chip or crack upon impact and can withstand higher exposure to heat. Polycarbonate lenses are given a special coating to improve abrasion, UV and chemical resistance; still, to prolong the life of your lenses, it is recommended that you only clean them with a mild detergent and soft cotton cloth.